Automatic Power Tester - 3602A Series Automatic Power Supply Tester RS-232C, Centronics

3602A Series Automatic Power Supply Tester RS-232C, Centronics

*Application Notes

902 3602A series product
option descriptions

630W For four Output DC-DC Power Supplies Tester

Hold-On Adjust.
Load Regulation.
Line Regulation.
Combine Regulation.
Efficiency.
Power Good / Fail.
Set-up / Hold-up time.
P-P Noise (PARD).
OVP Testing.
OCP Testing.
Short Testing.

All in one, Stand Alone SMPS tester, 3602A includes DC source Controller, Four
DC Load with Flexible Polarity configuration, One OVP, Two Timing and Four
PARD Measurement.
Manual or Computer Edit Mode
Manual, Auto, or Step Testing Mode
Centronics for all data direct print output
RS-232C for DownLoad/UpLoad Testing Procedure
Electronic Calibration
Ready to use Testing Fixture
Re-installable Option for PARD.

	Up to four output Power supply with any configuration of 2+/2-, 3+/1-, or 4+ Single, Qual, Tripple, or Quad Total output power up to 630W power supply. DC / DC Converter. Production Line. Quality Control. Incoming Inspection. Engineering Evaluation.

The 3602A was designed for testing DC / DC power supply up to 630W, it will accommodate power supplies with as many as four outputs. It will store test programs for eight different power supply specifications. each of these tests may include up to 32 steps of subtesting.Testing procedures can be generated and edited manually via front panel or remotely using Application Software 9800A; Testing may be performed in the Automatic or Manual mode. The manual mode accommodates individual selection of up to 32 test steps. The Automatic mode will provide Pass/Fail and Go/NG testing Stored programs and test data may be print out via Centronics interface. This information may also be uploaded to or downloaded from a PC via the RS-232C port.

The 3602A is ideal for statistical Analysis where UUT selective data is needed as data is visible on the front display. 3602A is a modify version of 3600A Tester, it deletes AC source and AC meters, then adds DC source controller and DC meters, For the external DC source, Please refer to Application Note PAN 902 for more details. Optional¡ @ 5030 OVP DC voltage source provides OVP testing in Load position 1 and 2. The 9900 Twin Testing Fixture is designed to yield higher throughput making it ideal for production and incoming inspection applications. Other test fixtures include the 9910 and 9920 which are general purpose test fixtures. Remote control of function keys 1 to 8 is made by 9930. Option 3602A001 and 3600A004 offers a different configuration to meet the testing requirement and budget of varies field; You can choose with or without PARD, Line-regulation , DC Meter; Of course, you can re-install these option after purchase 3602A or 3600A.