3310D Series DC Electronic Load

3310D Series DC Electronic Load

Voltage/Current source
SMPS transient response
Current limit testing and battery emulation
Battery charger
Battery discharge
R&D, Quality Control
ATE system
Production testing

Can display V.A.W. value simultaneously
LCD large Display
Knob to adjust setting value
OCP, OPP test function
CC, CR, CV, CP, Dynamic, Short Mode
4 1/2 V/A/W Meter on each module
150 Store/Recall Memory on 3300C/3302C Mainframe
SHORT time setting and SHORT_VH, SHORT_VL setting function
Voltage meter display "+" or "-" is selectable
Protections against V, I, and °C

• 3310D series Module are used with the 3302C single mainframe and 3300C 4ch Mainframes.

• Each 3310D Series Module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, 150 Store/Recall memory which provides load set-up more efficiently.

• SHORT time setting and SHORT_VH, SHORT_VL setting function

• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and there is and external signal input so that load can have a simulated Arbitrary Waveform.
  
  

• OCP, OPP test function operated by both mainframe and module that will be more effective and accuracy on OCP, OPP testing.




• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display "+" or "-" is selectable and 150 sets larger memory  is much advance features than 3310C series.

BNC-Clip cable 1pc.
Banana Plug 2pcs.
Hook terminal 2pcs.
Operation Manual 1pc.